Physical Plant Department
 servicesabout ppdresourceswork order form



resources

 FAQ: Heating
 FAQ: Heating in Administrative
& Academic Halls

 FAQ: General Information for Student

 Utilities Information


 Residence Hall Floorplans

Digest of General Announcements

 Virtual Tour

 Campus Map

 Green Colby:
    Recycling,
Campus Conservation



PPD Home



faq_heat
Contact Information:

PPD Hot/Cold line
x3895

PPD office
x3350

Submit a request via the
Work Order Form

Email us

After hours, call Security
x3345

Please be sure to provide your name, phone number, hall, room number, type of problem, and what parts of the building are affected.

The College turns the heat on each year when the outside temperatures drop below 55 degrees on a regular basis. Since it is based on weather, there is no pre-determined day, but it usually falls during late September or early October.

The heat in residence halls is set to maintain a temperature between 65 and 70 degrees. We are not able to control the heat on a room by room basis. The heat in the residence halls operates on two or more zones depending on factors such as relationship to the sun and location of the room within the building. Outside air temperature, room size, number of windows, number of exterior walls, number of people, and amount and placement of furniture in a room all impact the temperature.

My radiator isn't even warm, how do I turn it on?
The radiators are not warm all the time. When the sensor reads that the temperature in your zone is correct, the heat to the radiators will stop until the sensor reads a temperature that is below the set point.

What should I do if my room is too hot?
First, you can check on a couple possible causes.

  • Is the outside temperature much warmer today than yesterday? (The heating system in a large building can be slower to adjust to fluctuating outside temperatures. This can be a particular problem in the fall and spring when the daily highs can vary by 20 or 30 degrees.)
  • Is there a window or door open elsewhere in the building that could be activating the heat?

If these do not seem to be the cause, please do the following:

  1. DO NOT simply open the window. It wastes energy, it will not solve the problem and may, in fact, make it worse.
  2. Call the PPD Hot/Cold line at X3895 or other contacts listed below. Please ensure that you provide your name, phone number, hall, room number, type of problem, and what parts of the building are impacted.

What should I do if my room is too cold?
First, you can check on a couple possible causes.

  • Make sure that the radiator or baseboard heat is not obstructed. If furniture is placed directly in front of the heat, pull it away from the wall to allow the air to circulate.
  • Check to make sure that there are no heat producing items (i.e. refrigerator, computer, lamp) placed in front of a thermostat or sensor. This would give a false reading of warm temperatures to the thermostat/sensor.
  • Check to make sure that there are no windows open. When closed, windows must be securely latched. If you have a storm window, ensure it is down and locked as well.
  • Make sure you are dressed for the season. In shorts and a t-shirt many people feel chilly at 65-70 degrees.
 


Services  |  About PPD  |  Resources  |  Work Order Form

Colby Home  |  Search  |  Directory

Colby College  Physical Plant Department  5000 Mayflower Hill Drive  Waterville, Maine 04901-8849
  T: 207-859-5000  F: 207-859-5005  ddeblois@colby.edu

Last Modified: 06/25/04 11:32:47 AM