Exchange Example Calculation
Here is an example calculation to get you started:
Simulation constants:
Line separation with no exchange:
Hz
T
2
, relaxation time with no exchange:
sec.
Enter one, but not both of the following parameters for the exchange:
Tau, exchange lifetime:
sec. or k, exchange rate:
sec
-1
Experimental data:
Make sure your frequencies are relative to the center of the spectrum. That is, the center of the spectrum should be at 0 Hz.
Frequency(Hz)
Intensity
Your experimental data is plotted in green and the simulation is plotted in red.
Exchange Spectrum
-15
15
Return to Exchange